Understanding Grain Discount Schedules

For more wheat processing plantinformation, please contact us. We will provide professional answers.

When it comes to settling the books after harvest and you start looking at your weigh tickets, it can be unclear just where all the numbers are from and how your payout will be calculated, especially if you work with multiple buyers. Figuring out how your buyers value your grain can help you position yourself more favorably in the marketplace. The following paragraphs review some key terms and calculations for understanding discount schedules.

It might be helpful for you to grab a weigh ticket of your own to follow along.

Some things are standard

The first value common to all weigh tickets regardless of mill is the gross weight, sometimes called the "heavy" weight or weight of the full truck coming in. A representative sample of grain is taken from the truck, and test weight, percent moisture, and foreign matter are determined. These factors will be discussed later. Once the grain is unloaded, the truck re-enters the scales to determine the tare weight, sometimes called the "light" weight, or weight of the empty truck going out. The difference between the heavy and light weights gives us our net weight, or how many pounds of grain were delivered, not considering moisture content.

Since we deal with grain on a volume basis, we need to convert our net weight to volume bushels, or the amount of grain in 1.244 cubic feet. We do so by dividing the net weight of the load of grain by a standard test weight, or the pounds of grain that fit into those 1.244 cubic feet at a standard moisture content. Standard test weights and corresponding standard moisture content for selected grains are shown in the table below.

CropStandard Test Weight
(Pounds per Bushel)Standard Moisture
(Percent)

Corn

56

15.5

Soybeans

60

13

Wheat

60

13.5

Barley

48

14.5

Oats

32

14

It's important to remember that these are not the same as the test weight and moisture values given on your weigh ticket. These standards were established by the USDA and are not based on your truckload. Once we divide our net weight by the standard test weight, we are left with gross bushels. 

Now it depends where you go

One method is to next account for shrink, which has two components: drying shrink and foreign material shrink. Drying shrink is the weight that will be lost by drying "wet" grain down to the standard moisture&#;the larger the difference between the measured "wet" and standard moisture, the more water will be lost, and thus greater shrinkage will be experienced during drying. Details on calculating drying shrink can be found in this excerpt from the National Corn Handbook. A drying/handling fee is often also applied to cover the cost of drying the grain down to the standard moisture.

Contact us to discuss your requirements of structure of hammer mill. Our experienced sales team can help you identify the options that best suit your needs.

Suggested reading:
How to Choose Single Stage Air Compressor? A Comprehensive Guide
Investing in Myanmar's Biomass Briquette Machine

The USDA's definition of foreign material (FM) varies by crop, but is typically anything other than the crop that falls through sieves specifically sized for each crop&#;this may be pods, stones, weed seeds, other crop seeds, dirt clumps, etc. FM over the buyer's threshold (sometimes there is zero-tolerance for FM) will result in another shrinkage calculation. If the buyer uses the shrinkage method, they typically reference a table like the one shown in this sample discount schedule.

The total shrink is then subtracted from the gross bushels and is shown as net bushels on the weigh ticket. This is one way a mill avoids paying for excess water and unwanted materials that can bulk up a truckload of grain.

Alternatively to the shrink method, a mill might assign a moisture discount factor, which is a tiered deduction from the selling price of each bushel. An example of this type of discount schedule is shown below.

Once moisture is accounted for either through shrink or moisture discounts, further discounts may be applied. For example, if the measured test weight (TW) falls below the allowable minimum, the grain price will be discounted according to the buyer's policy, often one or so cents per point below the threshold. This test weight determined from the representative sample taken upon arrival at the scales is what appears on the weigh ticket, and is how many pounds of your grain at its current moisture (not the standard moisture) fit into that 1.244 cubic feet, or bushel, mentioned earlier. If FM was not accounted for in shrinkage, it can also be discounted at this point.

Depending on mill policy, other miscellaneous discounts may be applied, for any of the following: aflatoxins, musty of sour grain, moldy or heat damaged grain, commercially objectionable foreign odor (COFO), or live or dead insects. Outright rejection of a load of grain may occur for any type of dockage that exceeds mill thresholds.

Putting it all together

Two simplified sample weigh tickets, and payouts from the same load of soybeans taken to two different mills are listed below. Discount schedules from the two example mills above will be used.

Example 1&#;PSU Mills, Shrink Method, Soybeans:

PSU Mills Weigh Ticket

Soybeans

Gross Wt: 50,000              Moisture: 16.1
Tare Wt: 20,000                TW: 53.9
Net Wt: 30,000                  FM: 3.1

Gross Bushels: 500           Spot Price: 9.00
Net Bushels: 462.5

____________________________________________________

1. Calculate net weight
   1. 50,000 pounds &#;20,000 pounds = 30,000 pounds
2. Calculate gross bushels
   1. 30,000 pounds ÷ 60 pounds per bushel = 500 gross bushels
3. Calculate moisture shrink
   1. 0.035 (from table) × 500 gross bushels = 17.5 bushels moisture shrink
4. Calculate foreign material shrink
   1. 0.04 (from table) × 500 gross bushels = 20 bushels FM shrink
5. Calculate drying charge
   1. 16.1 percent - 13.0 percent = 3.1 percent above standard moisture
   2. 3.1 percent ÷ 0.5 percent (from table) = 6.2
   3. 7 (rounded 6.2 up to next whole number) × $0.02 per each 0.5 percent per bushel = $0.14 drying charge per gross bushel
   4. 500 gross bushels × $0.14 = $70.00 drying charge
6. Calculate net bushels or dry saleable bushels
   1. 500 gross bushels &#; (17.5 bushels moisture shrink + 20 bushels FM shrink) = 462.5 net bushels
7. Calculate test weight discount
   1. 54 pounds per bushel minimum allowable TW &#; 53.9 pounds per bushel = 0.1 bushels under minimum allowable TW
   2. $0.01 discount per point under minimum × 0.1 × 10 = $0.01 discount per gross bushel
   3. $0.01 discount per gross bushel × 500 gross bushels = $5.00 test weight discount
8. Calculate other discounts (damage/splits/misc.)
   1. No other discounts applied
9. Calculate gross payment without discounts and drying charges
   1. 462.5 net bushels × $9.00 spot price = $4,162.50 gross payment
10. Calculate net payment
    1. $4,162.50 gross payment &#; ($70.00 drying charge + $5.00 TW discount) = $4,087.00 net payment for load

Example 2&#;Reed Mills, Inc., Moisture Discount Method, Soybeans

Reed Mills, Inc. Weigh Ticket

Soybeans

Gross Wt: 50,000              Moisture: 16.1
Tare Wt: 20,000                TW: 53.9
Net Wt: 30,000                  FM: 3.1

Gross Bushels: 500           Spot Price: 9.00

_______________________________________________

1. Calculate net weight
   1. 50,000 pounds &#;20,000 pounds = 30,000 pounds
2. Calculate gross bushels
   1. 30,000 pounds ÷ 60 pounds per bushel = 500 gross bushels
      1. Calculate moisture discount
      2. $0.91 moisture discount per gross bushel (from table) × 500 bushels = $455.00 total moisture discount
      3. Calculate foreign material discount
   2. No FM discount applied
      1. Calculate test weight discount
   3. 54 pounds per bushel minimum allowable TW &#; 53.9 pounds per bushel = 0.1 bushels under minimum allowable TW
   4. $0.01 discount per point under minimum × 0.1 × 10 = $0.01 discount per gross bushel
   5. $0.01 discount per gross bushel × 500 gross bushels = $5.00 test weight discount
      1. Calculate other discounts (damage/splits/misc.)
   6. No other discounts applied
      1. Calculate gross payment without discount
   7. 500 gross bushels × $9.00 spot price = $4,500.00 gross payment
      1. Calculate net payment for load
   8. $4,500.00 gross payment &#; ($455.00 moisture discount + $5.00 TW discount) = $4,040.00 net payment for load

For this exercise, if hauling costs are equal, the payout form PSU Mills (example 1) is $50 higher than Reed Mills, Inc. (example 2).

Many variations on discount schedules are currently in use. Your mill should readily share their discount schedule with you and be happy to explain any portion of it that you're unsure about. This is a great topic to breach over the winter so you can prepare for the next harvest season. Understanding and regular reviews of your buyers' discount schedules can help you make smart marketing decisions and improve cash grain profitability.

References

Hicks, D.R., and H.A. Cloud. "Calculating Grain Weight Shrinkage in Corn Due to Mechanical Drying." National Corn Handbook fact sheet NCH-61

Staton, M. "Understanding Soybean Discount Schedules." Michigan State University Extension.

Want more information on flour mill machine price? Feel free to contact us.