10 Things to Consider When Buying solar traffic light

Every time the PN junction temperature of the LED chip increases by 10 degrees, the life span of the semiconductor device will decrease by multiples. It can be said that heat dissipation is an important guarantee for ensuring the life and quality of LED street lights. In this regard, bad manufacturers mainly use cutting corners to reduce costs, and this hazard cannot be found at the beginning of use, and it usually takes a period to find out. 

The increase in temperature has an impact on the calendar life and cycle life of lithium batteries. The effect of temperature on the life of lithium batteries conforms to the Arrhenius equation. The temperature of lithium batteries increases, and the reaction speed increases. Related research shows that the temperature of lithium batteries per liter At a temperature of 10°C, the degradation rate doubles. When the remaining capacity is 90% of the same battery cell, the output capacity at 25°C is 300kWh, while the output capacity at 35°C is only 163kWh. When the temperature rises by 10°C, the cycle life of the battery cell is reduced by nearly 50%.

It can be seen that temperature has a significant influence on the cycle life of lithium batteries. Therefore, in the process of battery use, it is necessary to avoid long-term use of the battery under high-temperature conditions, especially the high rate charge-discharge cycle of lithium batteries under high-temperature conditions, which is also the main reason why the battery must be temperature controlled.

Therefore, the heat dissipation performance of the lamp must be considered. The solar panel is scorching when exposed to the sun. The solar panel must not be next to the battery and the LED light source.

The solar panel of the normal all-in-one/integrated solar street light is next to the battery, and it is a sealed space. The internal temperature can reach 70 degrees Celsius, which greatly damages the lifespan of the battery and the lamp beads. So we recommend the Foldable all-in-one/integrated solar street light

Read more

Estimated reading time: 6 minutes

Buying Guide for Municipal Solar Street Lights

Solar lighting is rapidly gaining traction as a cost-effective and eco-friendly solution for municipalities across the country. Municipal solar street lights offer an excellent opportunity to save on energy costs, reduce carbon emissions, and improve public safety. However, with the wide range of solar lighting products on the market, choosing the best system for your city can be overwhelming. To make an informed decision, it&#;s essential to consider a few key factors before purchasing a solar lighting solution. Below is a guide to help you find the best solar lighting for cities.

1. Evaluate Your Community&#;s Lighting Needs

Identifying the right solar lighting solution based on location and functionality

Before investing in municipal solar street lights, it&#;s crucial to assess the specific needs of your community. Different areas may have varying requirements depending on their intended purpose. For example, are you looking to illuminate high-traffic pedestrian areas, improve road safety in dark corners, or light up public parks to increase usability? Defining the goals of your solar lighting project will help you choose the right type and design of the lighting system.

Related: Tips for Evaluating Municipal Solar Lights ROI

Engage with community stakeholders to understand their concerns and preferences. This collaborative approach ensures you select solar lighting solutions that best serve residents, whether they prioritize increased safety in crime-prone areas or better walkability for evening commuters. The more you align your purchase with community needs, the more effective and appreciated the solar lighting will be.

2. Assess Solar Resources and Environmental Factors

How sunlight availability impacts solar lighting performance

One of the most critical factors when purchasing solar lighting is evaluating the solar resources available at your selected installation sites. Municipal solar street lights depend on the sun to generate power, so understanding the amount of sunlight your area receives is key to determining the system&#;s efficiency. Look for a supplier who will conduct a thorough assessment of the geographic and environmental conditions to ensure your chosen solar lighting system will perform optimally.

Consider variables such as shade from buildings, trees, and other structures that could block sunlight. Also, be mindful of seasonal variations in daylight hours, which can affect the system&#;s performance during certain times of the year. Conducting an energy analysis with the help of a solar lighting expert can provide a clear picture of how much power your solar street lights will generate and ensure that your investment will work efficiently throughout the year.

3. Understand Installation and Maintenance Costs

Evaluating long-term costs to ensure a sound financial investment

While solar lighting has the advantage of eliminating electricity bills, it&#;s essential to account for installation and maintenance costs. Infrastructure-grade solar lighting systems often require a higher initial investment compared to traditional lighting, but the savings over time make them highly cost-effective. Solar lighting systems typically have lower installation costs since they don&#;t require extensive wiring or trenching, and their maintenance costs are significantly reduced due to their durability and self-sufficiency.

If you want to learn more, please visit our website FAMA.

However, it&#;s important to be cautious about opting for low-cost consumer-grade solar lights, which may seem attractive due to their low upfront price. These systems often require more frequent maintenance, leading to higher long-term costs and increased liability for municipalities. Prioritize systems that balance upfront costs with long-term savings, ensuring your city or town benefits from reliable and cost-effective lighting for years to come.

4. Prioritize Quality, Reliability, and Durability

Why investing in high-quality solar lighting is crucial for municipalities

When it comes to municipal solar street lights, quality and reliability are paramount. The solar lighting systems you install will be exposed to the elements, so they must be durable enough to withstand harsh weather conditions such as rain, snow, and high winds. Investing in high-quality materials and components is essential to avoid frequent repairs and replacements.

When evaluating solar lighting solutions, be sure to consider products from reputable manufacturers that offer strong warranties and performance guarantees. Reliable systems not only ensure consistent lighting performance but also enhance public safety, reduce long-term maintenance expenses, and prevent service disruptions. While it may be tempting to choose a less expensive option, compromising on quality can lead to higher costs down the road in terms of both repairs and energy inefficiencies.

5. Explore Government Incentives and Funding Opportunities

Taking advantage of incentives to offset initial investment costs

Many municipalities are eligible for federal, state, or local incentives that encourage the adoption of renewable energy solutions like solar lighting. Before purchasing your solar lighting system, research the various grants, rebates, and tax incentives available for green energy projects in your region. These incentives can significantly reduce the upfront cost of your solar lighting investment, making it even more affordable to switch from traditional lighting systems to energy-efficient solar lights.

Working with an experienced solar lighting provider who is familiar with government incentives can also help streamline the application process and ensure you maximize your savings. These incentives are a valuable tool for municipalities looking to stretch their budgets while investing in sustainable infrastructure improvements.

Making an Informed Choice for Municipal Solar Lighting

Investing in municipal solar street lights is a forward-thinking decision that benefits both the environment and the community. By evaluating your city&#;s specific lighting needs, understanding available solar resources, accounting for installation and maintenance costs, prioritizing quality, and exploring government incentives, you can ensure that your investment in solar lighting is both effective and sustainable.

At Fonroche Lighting America, we specialize in providing high-quality, reliable solar lighting solutions designed for municipalities. Our solar streetlights are engineered for durability, safety, and energy efficiency, making them the perfect choice for cities looking to enhance public lighting while reducing their carbon footprint. Contact us today to explore how our solar lighting systems can meet your community&#;s needs and help you create a more sustainable and brighter future.

Contact Us Today

Contact us to discuss your requirements of solar traffic light. Our experienced sales team can help you identify the options that best suit your needs.