How to Choose Good Quality Building Formwork?

In today's market, many buyers of building formwork have been troubled: how to distinguish between good and bad building formwork? How to buy good building templates? There are many kinds of building templates, and the wood materials and glues are different. No one can guarantee its quality, so everyone must learn to buy and look. So, how to distinguish the quality of building formwork? Below we summarize several reference methods for your reference, you can take a look!

Click here to get more.

1. The texture of the building shuttering: it is the standard for judging the quality of the building formwork. The regular texture of the building template is beautiful and generous, do not choose those building templates with messy texture.

2. Color of building formwork: Excellent building formwork should have natural color, clear wood grain and visible raw materials. If the exterior color of the building formwork is heavier and the paint layer is thicker, it may be intentionally whitewashing the appearance defect of the building formwork, especially when the six sides of the building shuttering are closed with paint.

3. Cracks in building formwork: Cracks in medium and low-grade building formwork are inevitable, but it is not good if it is too large. Some cracks appear between the wood grains and will not extend, so you can use them with confidence. However, if some cracks penetrate the pellets, they should not be purchased. As these cracks extend, they will have a huge negative impact on the future.

4. Nodules of building templates: Nodules can be divided into active nodules and dead nodules. As a natural product, it is impossible to be without joints. The reasonable expansion of the seams will make the wood products more beautiful. A good product does not allow defective joints. It is stipulated that all movable joints with a diameter of 3m and dead joints with a diameter of 2mm shall not fall off and shall not be regarded as defective joints.

The above four methods are our experience summed up over the years, I hope to help you.

As one of the leading experts in formwork and scaffolding engineering, our wide range of off-the-shelf and custom products ensures that we can provide a solution for your construction project, no matter the size or location.

With the expertise of our R&D team, our technical team members on-site to assist you when necessary, and knowing that our solutions are always cost-effective, you can rest assured that from first contact to construction completion, we are Always there to support you. Welcome to consult.

What are the different types of formwork frames and facing panels?

Frames:

1. Timber

Timber is the most common material used for formwork frames. It is also suitable for most small construction projects due to its low cost, flexibility, and availability.
However, it has several disadvantages, including:

• Susceptibility to termites

• Tendency to absorb moisture

• Warping

• Swelling

• Shrinking

• Shorter lifespan compared to other formwork materials

Furthermore, timber cannot hold a significant amount of fresh concrete pressure and is also often discarded after a single project.

Aluminum does not absorb moisture so there will be no issues with warping or shrinking. It also has numerous advantages, such as:

• Scratch-resistant surfaces, resulting in less concrete adhesion and easier cleaning

• Due to the welded-in nuts, it is convenient to assemble and disassemble

• The aluminum frames can be repaired and refurbished

Although aluminum is usually more expensive than timber, the additional costs can be offset by reusing it multiple times.

3. Steel

Steel formwork comprises thin steel plates with hollow profiles, and is secured by locks or bolts and nuts. Although the initial costs are significant, they can be reused and thus provide long-term financial savings and returns. Steel has the same advantages as aluminum, except that it is tougher and easier to modify.

4. Plastic

This type of formwork consists of plastic panels or modular systems designed for concrete pouring. Like aluminum, it is easy to carry. However, it will hold less fresh concrete than steel formwork. Plastic formwork also requires more connections and alignments, thereby increasing the labor costs.

Nevertheless, plastic has several unique advantages:

• Easy to prepare if you need formwork quickly for complex-shaped concrete structures

• Lightweight but resistant to water

• Reusable, and you can recycle the damaged sheets and create new ones

  Goto Zolo to know more.

Facing Panels

1. Plywood

Plywood facing is often used with timber formwork and is available in various thicknesses and sizes. It is easy to handle and one of the cheapest materials on the market. In addition, as long as the plywood does not absorb moisture and therefore swell or warp, it can be reused.

2. Steel

Steel facing is suitable for circular or curved concrete sections. You can reuse it several times to offset the high initial cost.

3. Plastic

This material is durable and lightweight. It is also sustainable as it can be repaired and reused. Although plastic facing is rigid, it is still flexible enough to bend and shape. If handled properly, you can reuse it many times.

Which formworks are required for specific concrete structures?

The unique formwork system you need will depend on the type of concrete structure you are building.

1. Foundation

As with any concrete structure, a home construction project will entail building a strong foundation. When designing a foundation formwork, you must consider the number of columns and walls required as well as the size and shape of the footing.

2. Slab

Once the foundation is in place, the next step is to design the slab formwork. Depending on the type of structure you are building, you can choose either a conventional slab formwork or a modular slab formwork.

Conventional

Due to its design flexibility, conventional slab formwork is suitable for most concrete layouts. This formwork system will require the use of

• Facings

• Crossings

• Girder stringers on props or shoring towers

Modular

Modular slab formwork systems will enable you to cut the cost of the materials by almost half and also speed up your construction time. The panels include integrated

• Facings

• Primary and secondary beams

• Props with drop heads

3. Column

For circular formworks, steel is suitable as it is economical, reusable, and available in various dimensions. If you only intend to use the formwork once, previously used or discarded formworks will be perfectly adequate.

Meanwhile, for rectangular columns, there are three formwork options:

• Timber girders secured by steel walers and plywood facing are suitable for multiple columns of a particular size or shape.

• Windmill systems composed of columns or multi-purpose panels are used for standard-sized columns.

• Foldable column formwork is used for high columns. This system can enable you to make significant savings on labor, time, and construction costs as all the essential components are integrated into a single platform.

4. Wall

There are several types of wall formwork.

Conventional

This is a flexible wall formwork system as it uses squared timber and boards or sheets. However, the conventional system has some disadvantages. Each component needs to be assembled on-site and according to exact specifications. This can result in a longer construction time and also significant construction costs.

Girder

Girders are much better than their conventional counterparts. This formwork system has girders with two chords and one web. The panels are also standardized and ready for use.

Frame

Using frames can reduce your building time as a single panel contains all the essential components.

Single-sided / two-sided

Single-sided formworks are often used when you need to pour the concrete against an existing structure, hill, or soil. Meanwhile, the two-sided system is installed on both sides of the wall.

Prefabricated

This system comprises two prefabricated concrete panels assembled and transported in advance. Once it has been set up, it can be quickly filled with concrete. Builders prefer prefab formworks as they help reduce labor time and costs. However, you must ensure that the formwork is transported safely and on time in order to avoid costs and delays.

There are also other special types of formwork, including circular systems for septic tanks and climbing systems for high-rise residential buildings.

What qualities should you look out for in a formwork system?

You need to consider the following factors when choosing a suitable formwork material and system for your house construction.

Load Capacity

The form should be able to withstand:

• Deadweight – this refers to the total weight of the concrete structure, including permanent loads

• Live weight – the maximum possible weight of the occupants, traffic, equipment, and other temporary loads

Shape retention

The formwork construction must be able to retain its shape and be supported by the necessary props and braces.

Lightweight and reusable

Formworks that are easy to handle, transport, and assemble will reduce your time and labor costs. Meanwhile, reusable and easy-to-repair forms are excellent investments and are also environmentally friendly.

Furthermore, a high-quality formwork will not leave any concrete damage once it has been removed.

Conclusion

Residential construction work will always require the use of reliable formwork systems. Depending on your specific requirements, you can choose between timber, aluminum, steel, and plastic formwork. The various sections of your concrete structure, including the foundation, slabs, columns, and walls, will require specific systems. Ideally, the formwork you choose will be reasonably priced, durable, reusable, and cost-effective.

Contact us to discuss your requirements of formwork accessories. Our experienced sales team can help you identify the options that best suit your needs.