Knowledge of Diagonal Pliers

Diagonal pliers are mainly used to cut wires and excess leads of components. They are also commonly used to replace ordinary scissors to cut insulating sleeves and nylon cable ties.

X-Spark contains other products and information you need, so please check it out.

The knife edge of Diagonal Cutting Pliers can be used to cut the rubber or plastic insulation of flexible wires. The knife edge of the pliers can also be used to cut wires and iron wires. When cutting No. 8 galvanized iron wire, use a knife to cut back and forth around the surface a few times, and then only need to pull it lightly to break the wire. Guilloches can also be used to cut hard metal wires such as wires and steel wires. Electricians often have various specifications such as 150.175.200 and 250mm. It can be purchased according to the needs of internal or external work types. The teeth of the pliers can also be used to tighten or loosen nuts. Diagonal pliers is one of the small hardware tools, also known as "diagonal pliers". It has the broadest function and is an indispensable tool in daily life and work.

Classification

Diagonal nose pliers are also known as "diagonal nose pliers" on the market, and they are divided into many categories of diagonal nose pliers. Diagonal nose pliers classification: professional electronic diagonal pliers, German labor-saving diagonal pliers, stainless steel electronic diagonal pliers, VDE resistant High-pressure large-end diagonal pliers, nickel-iron alloy European diagonal pliers, precision polished American diagonal pliers, labor-saving diagonal pliers, etc.

In addition, the sizes of diagonal pliers on the market are generally divided into: 4", 5", 6", 7", 8". Those larger than 8" are relatively rare, and smaller than 4". Generally, the market is called mini diagonal Clamps, about 125MM.

function

The function of diagonal pliers was mainly to cut off wires, 2.5 mM&SUP 2. The single strand of copper wire is very hard to cut, and it is easy to cause pliers to be damaged. Therefore, it is recommended that the diagonal pliers should not cut 2.5mm&SUp 2. Above single-ply copper wire and iron wire. In the size of the choice of 5 ", 6 ", 7 "mainly, ordinary electrical wiring choice of 6", 7 "cutting ability is relatively strong, shear effortless. Circuit board installation and maintenance mainly 5 ", 6 ", easy to use flexible, long time use is not easy to fatigue.4 "is a mini pliers, only suitable for small jobs.

Matters needing attention

Use pliers according to your strength. Do not use pliers to cut steel wire, steel wire and copper wire that is too thick. Otherwise, it will easily lead to teeth collapse and damage of forceps.

Method of use

The cutting edge of diagonal pliers can be used to cut rubber or plastic insulation for flexible wires. The cutting edge of pliers can also be used to cut wire and wire. When cutting no. 8 galvanized iron wire, the blade should be cut back and forth around the surface for a few times, and then the wire should be broken only with a gentle pull. The guillotine can also be used to cut wire, steel wire, and other hard metal wire. Electricians commonly use 150, 175, 200, and 250mm and other specifications. Can be based on the internal or external type of work needs to choose and buy. The jaws of pliers can also be used to tighten or loosen nuts.

Personnel using tools must be familiar with the performance, characteristics, use, storage, and repair and maintenance methods of tools. The use of pliers is right-handed. Turn the jaws of the pliers inward to control the cutting part of the pliers. Put your little finger between the two grips to press against the grips, and open the head of the grips to separate the grips flexibly.

We are diagonal pliers suppliers, if you are interested in our products, please feel free to contact us.

Nov. 09,

How do you cut wire, over and over again, without getting tired?

The answer you're looking for is diagonal cutting pliers.

But why are these pliers different from other pliers? Why are they so easy to use? In this article, we will tell you everything about these diagonal cutting pliers.

For more Diagonal Plier Usesinformation, please contact us. We will provide professional answers.

What are diagonal-cutting pliers?

A diagonal cutting plier is a type of plier used to cut wires. They are also known as side-cutting pliers, flat-cutting pliers, side-cutting pliers, wire-cutting pliers, and mitering pliers. They are designed to perform cutting rather than gripping or pulling tasks. They consist of a pair of jaws, a pivot point, and a pair of handles. The handles are usually dipped in colored plastic, which provides a unique look and insulation to identify the tool.

The jaws are sharp and beveled to cut wire closely and efficiently. The pivot point between the jaws and the handle is placed close to the jaws to provide maximum mechanical advantage to the technician using the tool. There are many alternative names for diagonal pliers, including dykes, mitering pliers, and side-cutting pliers.

Pliers are a class of tools that have multiple uses, with diagonal pliers being more narrowly focused. Other types of pliers are better suited for gripping and manipulating wire because they have a blunt or ridged surface that is not intended to be cut. Mechanics such as electricians occasionally have a multipurpose pliers tool that combines the beveled edge of a pair of pliers with the gripping surface found in other types of pliers. But for their designated cutting tasks, beveled-nose pliers are perfect. The metal in the jaws of a pair of diagonal cutting pliers is usually carbon steel or another alloy that is hard enough to penetrate the softer, conductive metals used in wire, such as copper.

How are side cutters different from

regular pliers

?

Side-cutting pliers have the following characteristics.

These pliers cannot be gripped. They have cutting edges in the jaws.

The pliers have an angled edge. This means they are designed to cut wire by applying a greater cutting force.

The jaws and cutting edges are hardened to increase the life of the cutter.

Is there a difference between diagonal cutting pliers and electronic pliers when cutting cable ties? 

Diagonal cutters are great pliers to have in any toolbox. They are suitable for cutting a variety of different sizes of wire and solid materials, such as screws. However, they are not suitable for cutting cable ties or cable ties. The blades on the miters are not flush, which means they leave "spikes" of material when the cut is complete. This is not a good thing for zippers. The small plastic spike that remains is usually very sharp and can cut your hands and arms when handling the wire harness. A better tool choice for this application is a pair of electronic pliers. The electronic pliers are designed to not only cut the electronics cleanly but also cut the ties flush and leave no nails, which means no more cuts to your hands.

PROBUILT has the widest selection of wholesale pliers, so you can buy the best hardware for your entire hardware store from our product line and save money on every purchase.

For more information, please visit Trox Tool.