What is a crawler drilling machine?

A cpneumatic crawler drilling rig is a light-duty deep-hole drilling rig that uses compressed air as power and is equipped with a crawler walking structure. Pneumatic crawler drill is mainly composed of track assembly, chassis assembly, drive assembly, fuel tank assembly, control assembly, column assembly, main engine assembly, hose assembly and other parts. It has the advantages of 360 ° horizontal angle drilling and so on. Crawler pneumatic drilling rigs can drill holes for water discharge, gas drainage, pressure relief holes in the bottom plate, slit holes in the roof, geological exploration holes, and mine blast holes. It saves time and effort and works efficiently.

TongShun Product Page

The drilling operation and walking of the crawler pneumatic drill rig are controlled by an independent console. For drilling operations, you must first stabilize the drilling rig and turn the start-stop button of the drilling rig console to the stop position, and then move the back-end ball valve on the pumping station to get the air source for the drilling rig's pneumatic console.

As one of our most popular types of drilling equipment, it is very convenient to use. There are two reversing valves on the console to control the rotation and advance as well as retreat of the drilling rig respectively. There is also a ball valve to control the amount of water in the punching process. The right control valve controls the rotation of the rig. Push it forward, the host will rotate forward; pull it backward, the host will reverse; and push it to the middle position, the host will stop. The left control valve controls the forward and backward of the gyrator. When pushing it forward, the gyrator advances; when pulling it backward, the gyrator retreats; and when pushing it to the middle position, the gyrator stops.

The pneumatic crawler drill can be used when connected to the high-pressure tuyere. No motor and no electricity is required, so there is no risk of explosion and the safety parameter is high. The pneumatic crawler drill can work across belts and scrapers. It is suitable for perforation and blasting in mines, earth and rock engineering, severe cold areas, extreme areas, and high-altitude areas. It can also be used to drill and guide detection holes in tunnels and mines.

Crawler mounted hydraulic dth drilling rig refers to a fully hydraulic rock drilling and drilling machine with a crawler traveling mechanism. The crawler hydraulic drilling rig is composed of a power unit and a hydraulic system, a crawler traveling mechanism, a drill frame equipped with a hydraulic rock drill and a propeller, a support arm, and a drill rod unloading device.

Introduction

The crawler hydraulic drilling rig refers to a full hydraulic rock drilling and drilling machine with a crawler traveling mechanism.

Structure

The crawler hydraulic drilling rig is composed of a power unit and a hydraulic system, a crawler traveling mechanism, a drill frame equipped with a hydraulic rock drill and a propeller, a support arm, and a drill rod unloading device. The drilling hole diameter is 35 ~ 125mm, and the drilling depth can reach 30m, which is suitable for large-scale stone excavation and drilling operations. Except for high-pressure air or water used for drilling and drilling, all other operations are hydraulic.

Contact us to discuss your requirements of Crawler Mounted Water Well Drilling Rig. Our experienced sales team can help you identify the options that best suit your needs.

Crawler Mounted Hydraulic DTH Drilling Rig

Advantages

Compared with the pneumatic monk rock drill (air drill), the crawler hydraulic drill has the advantages of low power consumption, high rock drilling speed, low noise, and improved working conditions.

Features

Hydraulic crawler drills are the stereotyped products of hydraulic rock drills, which are characterized by:

(1) The rig can swing, telescope, and swivel, has mobility to adapt to the operating environment, and can shorten the preparation time for the operation.

(2) The front end of the working cylinder is equipped with a two-way hydraulic locking device to ensure safety and stability.

(3) The tracked walking mechanism adopts a separate pressurized driving device, and is equipped with a hydraulic jack support device, which can turn in place and can adapt to uneven ground operations.

(5) Equipped with drill pipe unloading device, equipped with 5 ~ 7 drill pipes, which can be used to quickly complete the operations of connecting, disassembling, centering, entering and exiting the drill pipe, etc., which saves time and reduces physical labor.

Tracked pneumatic drilling rig efficient application in coal mines

Pneumatic drilling rig for mining: High-efficiency drilling rig with simple operation in coal mine. Crawler-type pneumatic drilling rig is a compressed air powered drilling rig for walking and drilling. Although it sounds complicated, it is simple to operate. One row of operating tables, 6 operating levers, forward and backward, turn, adjust the angle of the drilling position, and drill out Get it all.

The drilling operation and walking of the crawler pneumatic drill are controlled by an independent console. For drilling operations, first stabilize the rig and turn the start-stop button of the rig console to the stop position, and then pull the rear-end ball valve on the pumping station to get the rig's pneumatic console. There are two reversing valves on the console to control the rotation and advancement of the rig, and a ball valve to control the amount of water in the drilling process. The right control valve controls the rotation of the rig. It pushes the host forward and pulls backward to reverse. The middle position stops. The left control valve controls the forward and backward movement of the gyrator, pushes the gyrator forward, pulls the gyrator backward, and stops in the middle position.

This type of coal mine underground crawler-type pneumatic drilling rig can be used in connection with high-pressure air outlets, no motor, no electricity, no explosion danger, high safety. Pneumatic crawler drilling rigs can be operated across belts and scrapers, and are suitable for drilling underground holes such as water holes, gas holes, pressure relief and punching.

The company is the world’s best Threaded Water Well Drill Pipe supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.