When to Use semi trailers manufacturer in china?
Semi Truck Trailer Manufacturer, Supplier, Company, Factory ...
We serve with care to be your reliable trailer factory bringing you greater value
Click here to get more.
Ultraton is committed to truck trailer manufacturing and offers various types of semi trailer and truck trailer whosale ranging from 30T to 150T. We also provide design and modification on your need. Our products are running in Southeast Asia, Middle East
How to use and operation China semi trailer and truck ?
As semi trailer manufacturer and with more 15 years rofessional production experienceToday to share some experience in the use of semi-trailers . Hope to help you.
1. Connection of semi-trailer and tractor
1) Check items: Matching of tractor and semi-trailer
Fifth wheel is higher 50~100mm than semi-trailer.
2)Check items: Turn interference caused by the height of tractor and semi-trailer
Problem descriptions: When turning, the semi-trailer front end touches the tractor cab, or the tractor rear end touches the semi-trailer .
3)Check items: Fifth wheel and king pin
Problem descriptions and Solutions:
A. See if there is sand, stone or other objects.
Clear up
B.See if there is grease on the fifth wheel
Add enough grease
C.Connection of fifth wheel
Tighten up or replace the bolts
D. King pin
Replace it if it is heavily worn
2. Connecting operation
1) In order to connect the king pin and the fifth wheel successfully, stop up the semi-trailer wheels with crossers first.
2) Operate the landing legs, and make the seat board of the semi-trailer king pin 10~30mm lower than the central position of the fifth wheel. Please do as the above, otherwise the connection may fail, and the fifth wheel, the king pin and some other parts may be damaged.
3) Pull open the unlock rod on the fifth wheel to expand the traction lock mechanism.
4)Reverse the tractor, guide the king pin into the opening of the lock mechanism through the V type opening of the fifth wheel, and push the lock block turn and lock the kingpin (That is to hear click and see unlock rod return).
5Turn on the semi-trailer air line switch on the tractor to connect the air line (connect the joint of the air-supply line of the tractor to the one of the semi-trailer, and the joint of the control line of the tractor to the one of the semi-trailer).
6Insert the wire connecting plug of the tractor into the wire connecting socket of the semi-trailer to connect the circuit.
7Properly operate the lifting landing legs to let them retract back, and then pull down the crank and put it on the hook.
You will get efficient and thoughtful service from AUTONE.
8Remove the crossers under the wheels.
3 . Running: Check before start
1Check if the tire pressure of the tractor and the semi-trailer is the specified value.
2Check if the spare wheel is installed correctly, if the nuts are tight and its pressure.
3 Start the engine to watch the air pressure gauge in the cab until the air pressure rises above 0.6Mpa.
4Push in the hand brake of the tractor, and obvious rapid air bleeding noise can be heard. When the brake chamber pushrod retracts back, release the parking brake.
5Check if the air line leaks, and if the brake system is in normal operation.
6Check circuit to see if the lamps are in normal condition, and if all wire connectors are connected well.
4. Start
After checking and the air pressure in brake system rises to 0.7~0.8Mpa, start the vehicle according to
the tractor operation requirements, and then check the brakes of the entire vehicle.
5. Running
After the above operation
the vehicle can run normally. Pay attention to the following:
1Avoid using the brake system of the semi-trailer. If the air pressure in brake system is too low, the emergency relay valve may brake the wheels automatically and wheel locking may occur.
2Avoid too hot drum brake on long or steep slope. Try to brake with the engine brake drum of the tractor.
3When running the speed shall not exceed the max. speed.
4Notice the height permitted on the road to avoid bumping against the device.
if you want know more anyothers pls feel free to contact us.
:
Contact us to discuss your requirements of semi trailers manufacturer in china. Our experienced sales team can help you identify the options that best suit your needs.